High quality standards, guaranteed strength, and durability offered by steel products provide a sense of security and stability. ArcelorMittal Europe’s trademark steels, including the HISTAR® and Amstrong® structural steel grades that combine high strength, good toughness, and superior weldability, perfectly match these requirements.
The aesthetics of steel and its unthinkable beauty can be seen in countless aspects:
- A large panel of surface finishes: smooth, grained, textured, or embossed.
- A wide choice of colours: solid, metallic, pearlescent.
- A required degree of gloss: anything from matt to high gloss.
- Various printed patterns can be proposed to complete the range of possibilities.
To obtain such performances, among other product ranges, ArcelorMittal Europe offers:
For outdoor use
- Granite® product range
- Indaten® weathering steels with their specific patina finish
For indoor use
- Estetic® product range
We are at your disposal, ready to offer products of the highest quality that perfectly suit your needs.
France’s first ultra-low carbon noise barriers10 May 2023
The posts of the first ultra-low carbon emissions noise barriers in France have been installed on the A10 motorway. Thanks to ArcelorMittal’s XCarb® recycled and renewably produced steel, the steel posts used to support these noise barriers have the lowest carbon emissions footprint available on the market.Project news
The world's first stadium with XCarb® recycled and renewably produced steel4 May 2023
Building a football stadium is always special, but the new 15 000-seat SC Cambuur stadium in Leeuwarden in the Netherlands is a first: It is the first stadium in the world to use XCarb® recycled and renewably produced steel.Project news
Successes for sustainable construction at BAU27 April 2023
ArcelorMittal took part in BAU, a major event for the construction and building industry, in Munich from 17-22 April, showcasing its latest high-performance steel products, XCarb® range of sustainable steels, and cooperations dedicated to construction.Event news
Who, if not investors, are the parents of every project? They are the ones who exude that first impulse - the idea. They turn their dreams into reality, transferring them onto paper through the imagination of an architect and the knowledge of an engineer. Both of these ingredients ensure the practical operation and use of the facility. No project would be possible without this vital team: investor - architect - engineer - contractor. It is the investor, however, who plays the deciding role and determines if the investment is to occur. There are multiple areas to be satisfied - aesthetics, quality, functionality, and of course, the one that in fact "manages" the investment - the economic one.
As a steel manufacturer who is involved in many investment processes, ArcelorMittal perfectly understands the various needs of a project and can provide products that meet all the demands requested by the market.
Economical steel is a concept known to everyone. A short construction periods allow for faster access to the facility and therefore limits construction costs, leads to earlier return on investment, and reduces interest charges.
As far as functionality is concerned, steel-framed buildings are not only easier to adapt, but in comparison to classic technology they allow for higher floors and more usable area - at the same time increasing cubic capacity.
Steel components as one of the most sustainable building materials in the world. Structural frames, external walls, solar shadings - they all provide credit points for green building rating systems like USGBC's LEED (Leadership in Energy and Environmental Design) or BREEAM (The Building Research Establishment Environmental Assessment Method), increasing the incontestable value of the investment.