Updated Environmental Product Declarations for XCarb® recycled and renewably produced flat products are available now on Constructalia.

Keeping you up-to-date

The following XCarb® recycled and renewably produced flat product EPDs have been updated as per The International EPD® System:

• XCarb® recycled and renewably produced heavy plates
• XCarb® recycled and renewably produced cold rolled coils
• XCarb® recycled and renewably produced hot rolled coils
• XCarb® recycled and renewably produced pickled and oiled hot rolled coils
• XCarb® recycled and renewably produced hot dip galvanised steel coils with Magnelis® coating
• XCarb® recycled and renewably produced hot dip galvanised steel coils with zinc coating

Download them on the right or visit our EPD library.

Text:
Constructalia

Images:
ArcelorMittal Europe

Related link(s)

Since its founding in 2015, Solarport has grown to become one of the largest suppliers of structural components for solar farms in the United Kingdom. During 2023, the company began to utilise Magnelis® ZM800 from ArcelorMittal Europe – Flat Products in the manufacturing of components for ground-mounted solar arrays. The heavier coating – 65 µm on each side of an S450GD-HyPer® substrate – enables Solarport to offer expected lifetimes of up to 40 years to solar farm operators. This is a crucial differentiator as investors become more aware of corrosion resistance. Although Magnelis® ZM800 only became commercially available in 2023, Solarport has already deployed it in several solar farms across the UK.

Magnelis® ZM800

The Solarport team discovered Magnelis® ZM800 on a visit to ArcelorMittal’s mill in Bremen, Germany with representatives from their local steel service centre, Davro Steel. “We were so impressed; we placed our first order for ZM800 before we even left the mill,” notes Liam Tattershall, Managing Director of Solarport. “That material went straight into a new solar farm.”

The company had already used Magnelis® in its components following a recommendation from Davro Steel. “We did several training sessions with the Solarport team to make them aware of the properties of this continuously hot dip coated steel,” says Greg Anthony, Managing Director of Davro Steel. “We also developed a calculator which allows Solarport to use geotechnical data from each site to adjust material selection.”

Sophisticated corrosion protection

“Magnelis® is a much more sophisticated corrosion protection solution than batch hot dip galvanisation (which offers max. 55 µm per side on 3.0 mm steel according to ISO 1461),” explains Liam Tattershall. “While the Magnelis® grades with lighter coating weights can meet the 25- and 35-year lifetimes required by customers, we needed something that could last even longer. With its 65 µm coating on each side, Magnelis® ZM800 allows us to offer lifetimes of up to 40 years. ArcelorMittal’s extensive testing programme gives us, and our customers, assurance that the material is durable.”

Magnelis® makes the manufacturing process simple as Liam Tattershall explains: “The folding, pressing, and rolling operations we perform in our facilities are very smooth. Magnelis® forms better than galvanised material and there is no pick-up of the coating on the rolls. With standard galvanised material, production was slower as there was a lot of material on the rolls which needed to be cleaned.”

Another key advantage over galvanisation is that Solarport does not need to send finished parts offsite for corrosion protection. “We save on transport costs and emissions,” says Liam Tattershall. “Magnelis® also heals on cut edges, ensuring that any scratches that do occur during transport or storage remain corrosion free.”

ZM800 becomes default standard

Following discussions with Davro Steel and ArcelorMittal, Solarport has plans to utilise Magnelis® ZM800 for most of its components. “We know that Magnelis® ZM800 will meet the requirements of many more sites and soils, so it makes sense to standardise our offer on this coating,” says Liam Tattershall. “That will provide us, and our customers, with a lot of confidence.”

With an ambitious goal to achieve 70 gigawatts (GW) of installed solar capacity by 2030, the government of the United Kingdom has dramatically kick-started the local photovoltaic (PV) industry. “The UK solar market has 15.8 GW of capacity installed to date,” notes Greg Anthony. “With its ability to produce around two gigawatts of capacity each year, Solarport is well positioned to meet the growing demand for solar in the UK. Using Magnelis® ZM800 will ensure a long life for these new installations.”

Providing the best solution for customers

Solarport is also looking at product optimisation to provide the best solution for customers. A key example is the company’s BESS battery mounting system. “Hybrid installations which include both solar power generation and batteries are becoming more common,” notes Liam Tattershall. “The battery helps electricity authorities to balance the grid. We’re redesigning our BESS system using value engineering. Our goal is to replace the existing material with rolled sections so Magnelis® can also be deployed in this application. This will reduce maintenance over the life of a solar installation.”

Having the support of ArcelorMittal Europe – Flat Products is important for Solarport and its customers explains Liam Tattershall: “ArcelorMittal already has Environmental Product Declarations (EPDs) available for Magnelis®. As the market becomes more aware of corrosion resistance and environmental considerations, this adds to the growing level of confidence in Magnelis®. We also get great support from ArcelorMittal when it comes to solving any technical problems our customers encounter. For Solarport, high-quality products and the satisfaction of our customers are the keys to our success.”

About Solarport

Solarport is a leading designer and manufacturer of solar mounting systems. Since being founded in 2015, Solarport has deployed utility scale and modular ground mounting systems across the UK and Europe. With its own manufacturing facilities in the UK, Solarport can produce up to two gigawatts of capacity annually.

More info: www.solarportsystems.com

About Davro Steel

Davro Steel is a major supplier of high-quality steel strip and sheet products to the UK and Europe. From its base in Birmingham in the United Kingdom, Davro Steel supplies all major steel markets including construction, automotive, yellow and white goods, and the renewable energy sector.

More info: www.davrosteel.co.uk

Text:
ArcelorMittal Europe Communications
Constructalia

Images:
© Solarport

Related link(s)

Gonvarri Industries’ photovoltaic solar structures division, Iberdrola, and ArcelorMittal are underlining their commitment to the energy transition with the signing of a new supply agreement for solar trackers for an Iberdrola project in Portugal. ArcelorMittal will provide 211.8 tonnes of its XCarb® recycled and renewably produced Magnelis® - the first photovoltaic project in Iberia to use this material.

The project

Gonvarri Solar Steel is a leader in the manufacture and supply of solar trackers and fixed structures with a track record of projects totalling more than 19 GW. It has signed a contract with Iberdrola for the supply of 41 MWp of its TracSmarT+1V solar trackers for this photovoltaic project in Portugal.

The project, located in the former Portuguese freguesia of Carregado, Lisbon, will have a total of 915 solar trackers (256 single-row and 659 dual-row trackers) and will be the first photovoltaic project in the Iberian Peninsula to use reduced CO2 emissions steel as the main component of the solar structures.

An Iberian PV premiere for XCarb® recycled and renewably produced steel with Magnelis® coating

The project will use 211.79 tonnes of XCarb® recycled and renewably produced steel with Magnelis® coating. This steel is produced via the EAF route using a high level of scrap and 100% renewable electricity. XCarb® recycled and renewably produced steel has an embedded CO2 footprint which is 70% lower than that of steel produced through the conventional steelmaking process.

It is the first project in Iberia that will use this low emissions steel, and it is aligned with the decarbonisation commitments of Gonvarri Industries, Iberdrola, and ArcelorMittal.

Gonvarri Solar Steel, Iberdrola, and ArcelorMittal are proud to be able to combine their commitment, expertise, resources, and experience as leaders in their respective sectors in this photovoltaic solar project in Portugal, which will serve as a benchmark for the development of new innovative, high-performance initiatives as a way to accelerate the transition towards a zero-emissions world.

Text:
ArcelorMittal Europe Communications
Constructalia

Image:
mvtstockshot/Shutterstock

Related link(s)